Highbond anchor FHB II-A L Inject

Drill diameter

Drill hole depth

Anchorage depth

Max. fixture thickness

Thread

Width across nut

= — =

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

Functionality

The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Bonded fasteners and bonded expansion fasteners for use in concrete

pdf, DoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

pdf,

Filling quantities für highbond-anchor FHB II-A L Inject

pdf,

Highbond-Anchor FHB II Inject - Permissible loads of a single anchor in normal concrete of strength class C20/25.