Termékkód 97699

GTIN (EAN-Code): 4006209976999

fischer Highbond anchor FHB II-A S M10 x 95/20 HCR

Name: fischer Highbond anchor FHB II-A S M10 x 95/20 HCR
Brand: fischer

Termékváltozat

Download of image data

Top Features

Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required.
Optimised anchor rod for the highest tensile loads.
Optimised for low axial and edge distances in cracked concrete.
No drill hole cleaning is required when using a resin capsule. This saves time.
ETA approval for cracked concrete.

RA-SDS
FIS HB 360 S
Quattric II 12/160/215 S

The best performance in cracked concrete for maximum tension loads - even in highly corrosive atmospheres.

Advantages

The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.

The fischer Highbond anchor rod FHB II-A L C is produced from highly corrosion-resistant steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, staircases, façades, and heavy steel constructions are securely installed in highly corrosive atmospheres.

Applications

Guard rails
Façades
Staircases
Steel brackets
Machines
Masts
Rash protection
Steelwork constructions
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Suitable for:

Concrete C12/15

Az adott esetben elérhető engedélyben szereplő adatok (építőanyagok, terhelések stb.) érvényesek. További dokumentumok itt találhatók: https://www.fischer.de/sdb.

Engedély

ETA-05/0164
DoP No. 0282
GS 3.2/16-352-1
(2103/12/12) - CM

Functionality

The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Szerelési útmutató pdf-ben

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Készült 12/14/2017

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Készült 01/19/2021

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Érvényesség kezdete 02/07/2017
vége 02/06/2027

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Érvényesség kezdete 07/15/2021
vége 07/15/2026

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A L

Load Table

pdf,

Highbond-Anchor FHB II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Installation Instructions

pdf,

fischer FHB II

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	110 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t_fix )	20 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	5
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209976999

fischer Highbond anchor FHB II-A S M10 x 95/20 HCR

Előnyök / Termékismertető

Használat és engedély

Szerelési útmutató

Műszaki adatok

Letölthető dokumentumok