The silane technology of the fischer injection mortar FIS SB enables a really high bond strength and therefore a really high load level. The European Technical Approval for cracked and non-cracked concrete and for seismic loads offers added safety. The fischer injection mortar FIS SB is suitable for use with the system components for fixation both inside and outside. It can be used with the threaded rod FIS A, the internal threaded anchor RG MI, and the rebar anchor FRA and reinforcement bars. The variable anchorage depths optimise the installation time and use of materials. The application temperatures range from -15° to +40° C and the operating temperature ranges from -40° to +90° C for long-term temperature exposure and up to +150° C for short-term temperature exposure depending on the mortar variant.
20 x Cartridge 390 ml 40 x Static mixer FIS MR Plus
Plastic box
20[pcs]
4048962277906
ETA-approval
Language on label
EN, ES, PT
Scale unit
180
Contents
20 x Cartridge 390 ml 40 x Static mixer FIS MR Plus
Packaging
Plastic box
Amount
20 pcs
GTIN (EAN-Code)
4048962277906
Legend = Permission Available— = Permission not Available
Viewed 3 of 3 variant (s)
The advantages / Product description
Advantages
The injection mortar FIS SB achieves a really high load level thanks to its bond strength.
Variable anchorage depths from 4x to 20x the threaded rod diameter enable perfect adaptation in line with the load to be applied, thus ensuring an optimised installation time and use of materials.
Top application temperatures of up to +150°C open up new usage areas for bonded anchors.
The processing of the mortar is even approved down to a chilly –15°C.
In combination with the internal threaded anchor RG M I, this product enables surface-flush removal and the reuse of the fixing point. This provides top flexibility.
The standard threaded rod FIS A can be set for light dynamic loads with the mortar injection system FIS SB in the sizes M12 and M16 in steel grade 8.8 or in the sizes M12, M16, M20 and M24 in stainless steel R and the fischer filling set.
Application and approval
Applications
Heavy steel constructions
Silo installations
Tall shelving
Sound barriers
Guard rails
Staircases
Suspensions of pipes, cable trays and suspended ceilings
Temporary fixings, e.g. for machines
Scaffold anchoring
Building materials
Approved for anchorings in:
Concrete C20/25 to C50/60, cracked and non-cracked
Suitable for:
Natural stone with dense structure
You can find detailed information on building materials in the registration document.
Approvals
ETA-13/0651
ETA-12/0258
ETA-19/0501
DoP No. 0165
DoP No. 0349
DoP No. 0352
ESR-3572
GS 3.2/11-243-2
EPD-Kiwa-EE-000431-EN
Assembly instruction
Functionality
The injection mortar FIS SB is based on a vinyl ester hybrid with silane technology. It is suitable for pre-positioned and push-through installation and can be used with the threaded rod FIS A or the internal threaded anchor RG MI.
Resin and hardener are stored in two separate chambers and are not mixed and activated until dispensed through the injection cartridge.
The mortar is extruded bubble free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
With push-through installations, the annular gap between the threaded rod and fixture is filled with the injection mortar FIS SB.
Environmental Product Declaration (EPD) for fischer injection mortars based on vinyl ester resin - FIS V Plus, FIS VW Plus, FIS VS Plus, FIS VL, T-Bond Pro.1, FIS AB, FIS C 700 HP Pro.1, FIS HT II, FIS HB, FIS SB, FIS RC II, FIS RC II Low Speed
Superbond-System: Injection mortar FIS SB with internal threaded anchor RG M I - Permissible loads of a single anchor in normal concrete of strength class C20/25.
Superbond-System: Injection morter FIS SB with threaded rod FIS A or RG M - Permissible loads of a single anchor in normal concrete of strength class C20/25.
