Silver-grey colour fits perfectly with hot galvanised surfaces (similar to RAL 9006).
Can be painted over.
Heat-resistant corrosion protection until +200 °C (briefly until +300 °C).
Quick drying.
High rub resistance.
The advantages / Product description
Ideal for repairing damaged zinc coatings using colour-matching corrosion protection.
Advantages
Zinc-alu spray represents a subtle repair to damaged hot-dip galvanised areas thanks to its colour matching with the hot-dip galvanisation.
Thanks to the excellent holding properties on blank metal, it guarantees a lasting connection to the base material.
The fast-drying Zinc-alu spray guarantees good, weatherproof corrosion protection and, as such, is suitable for use both indoors and out.
The fischer zinc-alu spray FTC-ZA provides lasting protection against rust and corrosion for all metal surfaces inside and outside. It is preferably used to repair damaged zinc coatings in a matching colour and to coat weld spots and drill hole areas. fischer FTC-ZA is a quick-drying, firmly adhering protection layer and is resistant to many chemicals.
Application and approval
Applications
For post-galvanising and repairing damaged areas of galvanised parts, drilling and cutting points and welded joints
Repairing damaged zinc coatings
Climate control and ventilation technology
Guard rails
Metal constructions
Sheet metal coverings
Building materials
All iron and steel surfaces
Hot-dip galvanised surfaces following drilling, ironwork or welding
Non-ferrous heavy metal
You can find detailed information on building materials in the registration document.
Assembly instruction
Functionality
Silver-grey colour (similar to RAL 9006) with high gloss level
Shake can well for approx. 2 minutes
Apply at a distance of 25–30 cm in a cross coat
Surface dust-dry after just approx. 8 minutes
Touch-dry after 20–25 minutes
Fully hardened within 24 hours
Smooth, non-porous film
High abrasion resistance
Long-term heat resistance up to approx. 200 °C (briefly up to 300 °C)
