ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry.
The long expansion element with three anchorage depths makes the SXRL versatile.
Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials.
Simple to assemble: Ribs prevent plug rotation during installation.
The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with T40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles.
The long expansion element with multiple anchorage depths of 50, 70 and 90 mm makes the SXRL an extremely versatile product.
Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole.
The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors.
When it is to be set deep, the longer ribs prevent the plug from turning during installation.
Application and Permission
Façade, ceiling and roof substructures made of wood
Gates and doors
Fire protection doors
Blinds / folding shutters
Kitchen hanging cabinets
Air conditioning units
Vertically perforated brick
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Thermal insulation blocks
Solid block made from lightweight and normal weight concrete
Solid sand-lime brick
Concrete ≥ C12/15
Also suitable for:
Natural stone with dense structure
Solid panel made from gypsum
* You can find detailed information on building materials in the registration document.
DoP No. 0048
DoP No. 0092
DoP No. 0152
For Details see corresponding Documents
The SXRL is suitable for push-through installation.
In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force.
In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate.
Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer.