The versatile with multiple anchorage depth.

Frame fixing SXRL with hexagon head screw

The fischer frame fixing SXRL with up to three anchorage depths is approved for multiple fixings of non-structural systems in concrete, masonry and aerated concrete with the fischer hexagonal safety screw. The SXRL 10 has also an approval for single-point fixing in concrete, SXRL 10 and 14 for the stand-off installation of façades under a compression load. In perforated brick masonry, the two expansion zones of the plug apply force evenly; in aerated concrete and solid building materials, they unite to form one long expansion element. This ensures excellent load values. The extensive assortment with diameters of 8, 10 and 14 mm and anchor lengths of up to 290 mm enable diverse applications. The SXRL with hexagonal screw and moulded washer is particularly recommended for fixing metal constructions.

Product variants

Download of image data

Product variants

Approvals / Test reports

49 Product variant (s)

Drill diameter

Anchor length

Min. drill hole depth for through fixings

Usable length at anchorage depth 50 mm

Usable length at anchorage depth 70 mm

Usable length at anchorage depth 90 mm

Legend = Permission Available— = Permission not Available

More results

Viewed 36 of 49 variant (s)

Advantages

The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product.
Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole.
The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors.
When it is to be set deep, the longer ribs prevent the plug from turning during installation.
The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing.
The SXRL with effective lengths up to 240 mm provides the right plug for every application.

Applications

Façade, ceiling and roof substructures made of wood and metal
Facade substructures under compression load (e.g. distance installation without a wall bracket)
Windows
Gates and doors
Wardrobes
Kitchen hanging cabinets
Squared timbers
Beams
TV consoles
Wall covering
Metal brackets
Metal supports
Cable ducts
Cable trays

Building materials

Approved for:

Vertically perforated brick
Aerated concrete
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Thermal insulation blocks
Solid block made from lightweight and normal weight concrete
Solid brick
Solid sand-lime brick
Concrete ≥ C12/15

Suitable for:

Natural stone with dense structure
Solid panel made from gypsum

You can find detailed information on building materials in the registration document.

Approvals

ETA-07/0121
DoP No. 0329
Z-21.2-2092
21-009-1(2

Functionality

The SXRL is suitable for push-through installation.
In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force.
In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate.
Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-07/0121

European Technical Assessment for fischer frame fixing SXR/SXRL - Plastic anchor for redundant non-structural systems in concrete and masonry

Created on 12/20/2022

DOP - Declaration of Performance

pdf, DoP No. 0329

Declaration of Performance for fischer frame fixing SXR/SXRL (Plastic anchor for use in concrete and masonry)

Created on 01/17/2023

DIBt, National German Certification

pdf, Z-21.2-2092

General construction technique permit - fischer frame fixing SXRL 10 used as a single anchor in concrete

Valid from 05/25/2021
to 05/25/2026

Test report (fire protection)

pdf, 21-009-1(2

fischer frame fixing anchor SXRL 10 under fire exposure

Valid from 11/16/2021
to 11/16/2026

Load Table

pdf,

Frame fixing SXRL 10 - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Frame fixing SXRL 8 - Recommended loads for a single anchor as part of a multiple fixing of non-structural systems.

Load Table

pdf,

Frame fixing SXRL - Permissible loads of a single anchor as part of a multiple fixing of non-structural systems.

Marketing Documents

pdf,

Frame fixings. The full range for all applications.

DIBt-approval
ETA-approval
Drill diameter ( d₀ )	10 mm
Anchor length ( l )	230 mm
Min. drill hole depth for through fixings ( h₂ )	240 mm
Usable length at anchorage depth 50 mm ( t_fix )	130 mm
Usable length at anchorage depth 70 mm ( t_fix )	160 mm
Usable length at anchorage depth 90 mm ( t_fix )	90 mm
Drive	TX40 / SW 13
Contents	—
Packaging	—
Amount	1 pcs
GTIN (EAN-Code)	4048962314724

DIBt-approval
ETA-approval
Drill diameter ( d₀ )	10 mm
Anchor length ( l )	260 mm
Min. drill hole depth for through fixings ( h₂ )	270 mm
Usable length at anchorage depth 50 mm ( t_fix )	210 mm
Usable length at anchorage depth 70 mm ( t_fix )	190 mm
Usable length at anchorage depth 90 mm ( t_fix )	170 mm
Drive	TX40 / SW 13
Contents	—
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4048962181036

DIBt-approval
ETA-approval
Drill diameter ( d₀ )	10 mm
Anchor length ( l )	290 mm
Min. drill hole depth for through fixings ( h₂ )	300 mm
Usable length at anchorage depth 50 mm ( t_fix )	240 mm
Usable length at anchorage depth 70 mm ( t_fix )	220 mm
Usable length at anchorage depth 90 mm ( t_fix )	200 mm
Drive	TX40 / SW 13
Contents	—
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4048962181043

DIBt-approval
ETA-approval
Drill diameter ( d₀ )	14 mm
Anchor length ( l )	80 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Usable length at anchorage depth 50 mm	—
Usable length at anchorage depth 70 mm ( t_fix )	10 mm
Usable length at anchorage depth 90 mm	—
Drive	TX50 / SW 17
Contents	—
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4048962206678

DIBt-approval
ETA-approval
Drill diameter ( d₀ )	14 mm
Anchor length ( l )	100 mm
Min. drill hole depth for through fixings ( h₂ )	115 mm
Usable length at anchorage depth 50 mm	—
Usable length at anchorage depth 70 mm ( t_fix )	30 mm
Usable length at anchorage depth 90 mm ( t_fix )	10 mm
Drive	TX50 / SW 17
Contents	—
Packaging	Folding box
Amount	50 pcs
GTIN (EAN-Code)	4048962206685

Frame fixing SXRL with hexagon head screw

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download