FIS EM Plus.

The injection mortar for strong bonds.

Your advantages at a glance:

  • The assessment (ETA) guarantees a service life of 100 years for post-installed rebar connections and anchorings in cracked concrete.
  • The injection mortar is approved for diamond-drilled and water-filled drill holes, as well as seismic applications of the performance categories C1, C2 and thus offers a secure hold even under extreme conditions.
  • Anchorages with the FIS EM Plus can be carried out safely in sealing surfaces in accordance with the Water Resources Law with an official building certificate (aBG) and an additional report.
  • The epoxy resin mortar enables the transfer of high loads and variable anchoring depths in combination with the anchor rod FIS A.
  • The approved anchoring elements allow for a broad range of applications, including temporary and removable fixings with the internal threaded anchor RG M I made of zinc plated or stainless steel R.

Purchase online now

Strong bonds for Western Europe’s largest infrastructure project

The Le Grand Paris project aims to unite the French capital with multiple suburban communities.
Western Europe’s largest infrastructure project will double the length of the Parisian métro network by 2030 and connect the city center to the suburbs.

In 14 years, 200km of additional rail lines with 68 new metro stations will be built. The FIS EM Plus was used to connect the floor slabs to the retaining walls by providing stability and durability to the project. To meet this demanding requirements, an additional ETA for the service life of 100 years was specially granted.

Four questions to a fixings expert

In a short interview, Dr. Thilo Pregartner, Head of Technology Transfer & Approvals, provides helpful expertise on our FIS EM Plus epoxy resin mortar.
For what applications does an injection mortar need a service life of 100 years and why does the FIS EM Plus even have 120 years?
Which additional product features are particularly helpful for the installer?

The answers to all these questions can be found in the expert interview.

What is so special about the fischer injection mortars?

Developed and produced in Germany

The fischer injection systems are not only developed in Germany, but also manufactured in Germany. From the development of the formulation in the in-house laboratory to the mixing of the ingredients and the injection of the specially developed cartridges, everything is manufactured in one plant in the south of Germany.

The close coordination of the individual teams ensures continuous quality control and perfectly coordinated production processes. The many fischer subsidiaries enable us to react to customer needs and changing market conditions at short notice. In addition to the external ETA and ICC tests, the products are also tested in our own test laboratory after each production step, e.g. by means of pull-out tests. Thus the fischer injection systems meet the highest quality requirements

Learn more now

The powerful injection mortar for post-installed rebar connections and anchoring in cracked concrete.

Lasts for eternity

In the ETA assessments, anchorages and post-installed rebar connections can be regulated with a service life of up to 100 years.

However, the FIS EM Plus can do more. An official expert report from the IEA Stuttgart even confirms a service life for anchorages up to 120 years. Thus, our FIS EM Plus injection mortar endures an entire century and is perfectly suited for large and long-lasting construction projects.


WRL-compliant connections

First WRL-compliant anchorage with an official building certificate

Today, environmental protection is more than just a concern of the soul. Mainly, it is also about protecting our waters as the basis of our lives. Anchorages for installations that contain substances hazardous to water and are not themselves provided with two sealing levels must meet special requirements in accordance with the Water Resources Law (WRL) and the Installation Ordinance (AwSV).

These special applications require specially tested injection systems, such as the fischer injection mortar FIS EM Plus. The system has been officially tested by the German Institute for Building Technology (DIBt) and received an official building certificate for liquid-impermeable concrete (FD concrete).
For coated concrete, fischer has proven the WRL suitability of the fixing system by an accredited testing institute and an external expert report.

The right injection mortar for strong bonds

  • The injection mortar FIS EM Plus can be used for post-installed rebar connections with diameters 8 - 40 mm. Even under seismic load and with a service life of 100 years.
  • According to the approval, diamond drilling does not require additional roughening of the drill hole by using the FIS EM Plus, which saves time and money.
  • The rebar anchor FRA with connection thread made of stainless steel fully uses the load bearing of the concrete. This allows very high tensile loads to be introduced into the anchorage base.
  • Accessories suitable for the construction site such as injection aids and extension hoses ensure a quick work progress. The FIS rebar case contains all the necessary individual components and thus ensures convenient installation.

Resistant to all weather conditions

  • The approved installation temperatures from -5 °C to +40 °C enables all-season use on the construction site
  • FIS EM Plus can be used in water-filled drill holes according to ETA approval and can therefore be used under all construction site conditions.
  • Even under extreme conditions, such as underwater applications, the injection mortar can be used without any problems in accordance with the ICC approval.

The FIS EM Plus product range

Triple pack of epoxy resin mortars

The FIS EM Plus injection mortar is available in three different cartridge sizes. Thus, the optimal cartridge is available for every application.

The right dispenser (dispenser | fischer) ensures precise dosing and maximum installation comfort. The FIS DCD S battery-operated dispenser (dispenser battery-operated | fischer) is especially suitable for larger drill holes.

To the product online catalogue

Compatible anchors and connectors

Your advantages of the anchor rod FIS A

  • The anchor rod FIS A is approved for use with FIS EM Plus in sizes M8 – M30 made of zinc plated or stainless-steel R.
  • Variable anchorage depths allow for optimum adaptation to the respective application and load requirements

To the anchor rod FIS A

Your advantages of the shear connector FCC-H

  • The FCC-H is a reinforcement bar with flange head for connecting concrete covers to the existing concrete structure.
  • The concrete-concrete shear connector FCC-H is approved for building renovation, e. g. the renovation of bridges, the increase of load capacity of ceilings or to reinforce pillars.

To the shear connector FCC-H

Your advantages of the rebar anchor FRA

  • The rebar anchor FRA is a concrete steel bar with metric connection thread made of stainless steel in sizes M12 – M24.
  • The connection thread enables the transmission of very high tensile loads.
  • The fischer rebar anchor FRA is approved for subsequently mortared overlap joints and connecting reinforcements.

To the rebar anchor FRA

Your advantages of the internal threaded anchor RG M I

  • The internal threaded anchor RG M I is available in the sizes M8 – M20 made of zinc-plated or stainless-steel R.
  • In combination with metric screws or threaded rods, RG M I can be used to create removable fixings.

To the internally threaded anchor RG M I

Safety is calculable

Measuring is so simple

The fischer design Software FiXperience supports you in measuring your projects safely and reliably whether you are a planer, structural engineer or craftsman. FiXperience is constructed modularly and useable for a variety of applications..

The new, modular structure of the program includes an engineers software and special application modules.

For chemical fixings, the modules MORTAR-FIX (fischer design software MORTAR-FIX | fischer), C-FIX (fischer design software C-FIX | fischer), REBAR-FIX (fischer design software REBAR-FIX | fischer) and RAIL-FIX (fischer design software RAIL-FIX | fischer) are particularly important.

Learn more now

Reference projects from all over the world

Hongkong-Zhuhai-Macau bridge

Far - Further - the Hong Kong-Zhuhai-Macao Bridge. 20 times as long as the Golden Gate Bridge in San Francisco, it serves as an over-water crossing for ten thousands of people every day.

Designed for a service life of 120 years, FIS EM Plus was convincing thanks to its durability. The product was also used because of its suitability for anchorages in seacoast regions and post-installed rebar connections.

Learn more

Anchor A true highlight - Germany's highest viewing platform

Bigger than any building in Baden-Württemberg: with the lift test tower, thyssenkrupp Elevator AG literally provides the new highlight in the popular region of southern Germany.

In order to fix this construction securely to the ground, our FIS EM Plus was used in zone 1, the area from 0-27 m.

Learn more

Anchor for the world's tallest statue

High above: India's "Statue of Unity" is 182 meters tall, surpassing every statue in the world. Visitors can look far out through openings from the viewing platform at chest level of the "Statue of Unity".

FIS EM Plus scored with high load-bearing capacity in concrete as well as applicability in earthquake areas and gives the "colossus" a strong hold.

Learn more

The St. Pauli Elbtunnel - a centuries-long connection

The 426.5-metre-long St. Pauli Elbtunnel has connected the northern harbour edge of the St. Pauli Landing Bridges with the Elbe island of Steinwerder for over 100 years.

As part of the tunnel renovation, the stairways for pedestrians were rebuilt. Our FIS EM Plus injection mortar provides earthquake-proof support for the 20-metre-high construction.

Learn more


Post-installed rebar connections
Rail fixings
Sound barriers
Seismic applications
Concrete cover connections
Diamond drilled holes
WRL-compliant connections
Underwater applications