Bolt anchor FAZ II GS

Economic fixing for cracked concrete with large washer

The fischer bolt anchor FAZ II GS with its large washer is the ideal bolt anchor for the highest requirements. With the steel anchor made from zinc-plated and stainless steel, heavy loads are secured in cracked and non-cracked concrete. The steel anchor with the large washer is perfect for securing steel components with slots, for example. Thanks to the two anchorage depths and the easy assembly process, the FAZ II GS can be used particularly flexibly. The tried-and-tested expansion clip introduces the loads into the concrete particularly safely, and enables a top load-bearing capacity.

Product Description

Advantages

The FAZ II GS with 8, 10 and 12 mm diameters are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort.
The significantly larger outer diameter of the washers for FAZ II 16 GS ensures a larger supporting surface, and as such allows for use in wood construction.
The pre-fitted washer ensures a fast installation.
Furthermore, the FAZ II GS bolt anchor offers all of the benefits of the FAZ II.

Available Product Variants

Application and Permission

Applications

Anchor plates with slotted holes
Façade sub-structures with slotted holes
Timber constructions
Tension anchor
Anchoring of wooden beams

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

* You can find detailed information on building materials in the registration document.

Permission

ETA-05/0069
DoP No. 0009
DoP No. 0081
DoP No. 0121
DoP No. 0756-CPD-0062

For Details see corresponding Documents

Assembly Instruction

Functioning

The FAZ II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Documents for Downloading

Additional Documents

Load table (PDF, 128 KB)

Approvals

Title	Type	Created
ETA - European Technical Assessment (PDF, 3 MB)	ETA-05/0069	03/07/2017
DOP - Declaration of Performance (PDF, 1 MB) Declaration of Performance fischer Anchor bolt FAZ II, according European Technical Assessment ETA-05/0069	DoP No. 0009	11/03/2015
DOP - Declaration of Performance (PDF, 2 MB)	DoP No. 0081	16/08/2016
DOP - Declaration of Performance (PDF, 2 MB) Declaration of Performance fischer Anchor bolt FAZ II, according European Technical Assessment ETA-05/0069	DoP No. 0121	10/07/2017
DOP - Declaration of Performance (PDF, 1 MB)	DoP No. 0756-CPD-0062	14/05/2013