The high-performance concrete screw for absolute installation ease

Concrete screw UltraCut FBS II 6 US

Name: Concrete screw UltraCut FBS II 6 US
Brand: fischer

The fischer concrete screw UltraCut FBS II 6 US is made of zinc-plated steel with a hexagonal head and pressed washer. The UltraCut FBS II 6 US is perfectly designed for applications like fixings of pipe routes, channel systems, ventilation ducts and facilities in the building service engineering. When the concrete screw is screwed into the drill hole using an impact driver, the thread flanks cut deep into the concrete, thus ensuring top load-bearing capacity. The low drilling effort saves time in the case of multiple fixations. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety.

Product variants

Download of image data

Product variants

Approvals / Test reports

5 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Screw length

Screw-in depth

Drive

Packaging

Legend = Permission Available— = Permission not Available

Viewed 5 of 5 variant (s)

Advantages

The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads.
The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements.
The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards.
The UltraCut FBS II 6 is approved for multiple use of non-load bearing systems and thereby ideal for the installation of pipe routes, cable trays and prestressed hollow concrete ceilings.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
Different head designs offer a maximum of flexibility and a perfect adaptation to the application.
The hexagonal head with pressed washer and ribs under the head prevent accidental loosening of the anchor making the system more secure.
The special head geometry for use in mounting rails with a socket (SW10) enables simple installation of the add-on part.
The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
The concrete screw UltraCut FBS II 6 offers the possibility for use in masonry (solid building material).
The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.

Applications

Pipeline routes
Suspension for individual pipes
Suspended mounting rails
Prestressed concrete hollow core ceilings
Cable trays
Ventilation ducts
Perforated tapes

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Prestressed hollow concrete ceilings C30/37 to C50/60 for the multiple use of non-load bearing systems
Bricks of clay (EN771-1)
Solid sand-lime brick (EN771-2)
Perforated sand-lime brick (EN771-2)

Also suitable for:

Concrete C12/15
Masonry with a dense structure
Solid building materials

You can find detailed information on building materials in the registration document.

Approvals

ETA-15/0352
ETA-18/0242
ETA-20/0134
DoP No. 0185
DoP No. 0227
DoP No. 0311

Functionality

The UltraCut FBS II 6 is recommended for the push-through and pre-positioned installation.
We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket.
Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).

Mounting Strip 1 Picture

1 / 7

Mounting Strip 2 Picture

1 / 3

Mounting Strip 3 Picture

1 / 2

ETA Certification Document

pdf, ETA-15/0352

European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete

Created on 10/05/2020

DOP - Declaration of Performance

pdf, DoP No. 0227

Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)

Created on 10/19/2020

ETA Certification Document

pdf, ETA-18/0242

European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Fasteners for use in concrete for redundant non-structural systems

Created on 11/13/2020

DOP - Declaration of Performance

pdf, DoP No. 0185

Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)

Created on 11/27/2020

ETA Certification Document

pdf, ETA-20/0134

European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry

Created on 07/14/2022

DOP - Declaration of Performance

pdf, DoP No. 0311

Declaration of Performance for fischer concrete screw UltraCut FBS II (screw anchor for use in masonry)

Created on 07/28/2022

Installation Instructions

pdf,

fischer UltraCut FBS II 6 GVZ

Load Table

pdf,

Concrete screw UltraCut FBS II 6 zinc plated - Permissible loads of a single anchor in cracked and non-cracked normal concrete (concrete tension zone) of strength class C20/25 (∼B25) / Permissible loads of a single anchor in non-cracked normal concrete (concrete compression zone) of strength class C20/25 (∼B25) / Highest permissible loads for a single anchor for multiple use for non-structural applications in cracked concrete C20/25 to C50/60.

Marketing Documents

pdf,

UltraCut FBS II.

System components

Hammer drill bit Quattric II S / Quattric II
74 variants

ETA-approval
DIBt-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	50 mm
Screw length ( l_s )	40 mm
Screw-in depth ( h_nom,min - h_nom,max )	25 - 35 mm
Drive	SW 10
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962329483

ETA-approval
DIBt-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Screw length ( l_s )	60 mm
Screw-in depth ( h_nom,min - h_nom,max )	25 - 55 mm
Drive	SW 10
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962329490

ETA-approval
DIBt-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw length ( l_s )	80 mm
Screw-in depth ( h_nom,min - h_nom,max )	25 - 55 mm
Drive	SW 10
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962329506

ETA-approval
DIBt-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	110 mm
Screw length ( l_s )	100 mm
Screw-in depth ( h_nom,min - h_nom,max )	25 - 55 mm
Drive	SW 10
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962329513

ETA-approval
DIBt-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	130 mm
Screw length ( l_s )	120 mm
Screw-in depth ( h_nom,min - h_nom,max )	25 - 55 mm
Drive	SW 10
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962329520

Concrete screw UltraCut FBS II 6 US

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download