The highest performance in class amongst dynamic anchors.

Highbond-anchor dynamic FHB dyn

The fischer Highbond-Anchor dynamic FHB-A dyn is processed with the injection mortar FIS HB. It is used to support dynamic alternating loads. The approved anchor with its cone shape ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete. It securely fixes guide rails for elevators, production robots, gantry and overhead cranes and tunnel ventilators (jet fans). The classification in accordance with fire resistance class R120, the assessment for the base material steel fiber concrete, variants made from high corrosion-resistant steel or an additional sleeve for higher transverse forces with the threaded rod FHB-A dyn V provide extra security.

Product variants

Download of image data

Product variants

Approvals / Test reports

10 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Anchorage depth

Width across nut

Packaging

Amount

Legend = Permission Available— = Permission not Available

Viewed 10 of 10 variant (s)

Advantages

The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB.
During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads.
The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete.
The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels.
The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety.
The ETA for static / quasi-static loads as well as the National technical approval for dynamic loads allow the use of sizes M12 and M16 also for the anchoring base steel fiber concrete.

Applications

Jib cranes
Gantry and overhead cranes
Guide rails for elevators
Tunnel ventilators (jet fans)
Gantries in road construction
Antennas and transmitter masts
Industrial robots

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber reinforced concrete (M12 / M16)

You can find detailed information on building materials in the registration document.

Approvals

ETA-06/0171
DoP No. 0355
(2103/12/12) - CM

Functionality

The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB.
FHB dyn is approved for pre-positioned and push-through installation.
Extruding the mortar causes the two components to be mixed and activated in the static mixer.
The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole.
The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application.
The lock nut prevents the nut from becoming loose.

Mounting Strip 1 Picture

1 / 10

Mounting Strip 2 Picture

1 / 11

Mounting Strip 3 Picture

1 / 11

ETA Certification Document

pdf, ETA-06/0171

European Technical Assessment for fischer Highbond-Anchor FHB / FHB dyn / FDA - Bonded fasteners and bonded expansion fasteners for use in concrete

Created on 07/10/2024

DOP - Declaration of Performance

pdf, DoP No. 0355

Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)

Created on 10/08/2024

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Valid from 07/15/2021
to 07/15/2026

Filling Quantities

pdf,

Filling quantities für highbond-Anchor dynamic FHB dyn

Load Table

pdf,

Highbond anchor dynamic FHB dyn - Design values for cyclic fatigue loading of a single anchor normal concrete of strength class C20/25

Installation Instructions

pdf,

fischer highbond anchor dynamic FHB dyn - Pre-fixing installation

Installation Instructions

pdf,

Curing Times

pdf,

Curing times for injection mortar FIS HB

Marketing Documents

pdf,

Dynamic fixing solutions.

ETA-approval
Drill diameter ( d₀ )	14 mm
Min. drill hole depth for through fixings ( h₂ )	130 mm
Anchorage depth ( h_ef )	100 mm
Width across nut	19 mm
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209920183

ETA-approval
Drill diameter ( d₀ )	14 mm
Min. drill hole depth for through fixings ( h₂ )	155 mm
Anchorage depth ( h_ef )	100 mm
Width across nut	19 mm
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209920190

ETA-approval
Drill diameter ( d₀ )	18 mm
Min. drill hole depth for through fixings ( h₂ )	155 mm
Anchorage depth ( h_ef )	125 mm
Width across nut	24 mm
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209920206

ETA-approval
Drill diameter ( d₀ )	18 mm
Min. drill hole depth for through fixings ( h₂ )	180 mm
Anchorage depth ( h_ef )	125 mm
Width across nut	24 mm
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209920367

ETA-approval
Drill diameter ( d₀ )	24 mm
Min. drill hole depth for through fixings ( h₂ )	225 mm
Anchorage depth ( h_ef )	170 mm
Width across nut	30 mm
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209920374

Highbond-anchor dynamic FHB dyn

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

ETA-approval
Drill diameter ( d₀ )	28 mm
Min. drill hole depth for through fixings ( h₂ )	275 mm
Anchorage depth ( h_ef )	220 mm
Width across nut	36 mm
Packaging	Folding box
Amount	5 pcs
GTIN (EAN-Code)	4006209920381