The best performance in cracked concrete.

Injection mortar FIS HB

The fischer injection mortar FIS HB is a system component of the fischer Highbond-System FHB II for fixing maximum loads in non-cracked and cracked concrete. Railings, machines and steel constructions indoors and outside can be securely fixed with the fischer Highbond-System FHB II. The special mortar can be used with the conical highbond anchor FHB II-A S (standard version), highbond anchor FHB II-A L (long version) in various steel qualities.

Variantes

Download of image data

Variantes

Approbations / rapports d'essais

2 Variantes

Language on label

Contents

Packaging

Amount

GTIN (EAN-Code)

Légende = Autorisation disponible— = Autorisation indisponible

Vu 2 de 2 variante (s)

Advantages

The Highbond system FHB II achieves the highest load values in cracked concrete. This means that fewer fixing points and smaller anchor plates are required.
The injection mortar FIS HB can be worked with the threaded rod FHB II-A S (short version ) or L (long version). Thus, you can select the most economical solution based on requirements.
The large container shape of the injection mortar FIS HB is ideally suited to series installation.

Applications

Guard rails
Façades
Staircases
Steel brackets
Machines
Silo installations
Masts
Rash protection
Steelwork constructions
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

* Vous trouverez des informations détaillées sur les matériaux de construction dans le document d'inscription.

Autorisations

ETA-05/0164
ETA-16/0637
ETA-21/0948
ETA-06/0171
DoP No. 0282
DoP No. 0293
DoP No. 0327
DoP No. 0353
DoP No. 0281

Functionality

The injection mortar FIS HB is suitable for pre-positioned and push-through installation.
Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when dispensed through the injection cartridge.
FIS HB can be used with the threaded rods FHB II-A S and FHB II-A L and glues the threaded rod completely in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.

Mounting Strip 1 Picture

1 / 10

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Créé le 12/14/2017

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Créé le 01/19/2021

ETA Certification Document

pdf, ETA-16/0637

European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete

Créé le 12/14/2017

DOP - Declaration of Performance

pdf, DoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

Créé le 01/19/2021

ETA Certification Document

pdf, ETA-21/0948

European Technical Assessment for fischer Highbond-Anchor FHB II for diamond drilling / extended working life

Créé le 09/09/2022

DOP - Declaration of Performance

pdf, DoP No. 0327

Declaration of Performance for fischer Highbond-Anchor FHB II for diamond drilling / extended working life (Bonded expansion fastener for use in concrete)

Créé le 09/16/2022

DOP - Declaration of Performance

pdf, DoP No. 0293

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded expansion fastener for use in concrete)

Créé le 01/03/2022

ETA Certification Document

pdf, ETA-06/0171

European Technical Assessment for fischer Highbond-Anchor FHB / FHB dyn / FDA - Bonded fasteners and bonded expansion fasteners for use in concrete

Créé le 07/10/2024

DOP - Declaration of Performance

pdf, DoP No. 0353

Declaration of Performance for fischer Highbond-Anchor FHB / FHB dyn / FDA (Bonded expansion fastener for use in concrete)

Créé le 02/23/2024

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A S

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A L

Safety Data Sheet

pdf,

Safety data sheet for 519665 FIS HB 150 C

Safety Data Sheet

pdf,

Safety data sheet for 519125 FIS HB 360 S

Load Table

pdf,

Highbond-Anchor FHB II Inject - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Installation Instructions

pdf,

fischer FHB II

Curing Times

pdf,

Curing times for injection mortar FIS HB

Curing Times

pdf,

Curing times for resin capsule FHB II-P / FHB II-PF HIGH SPEED

ETA-approval
Language on label	CS, DE, EN
Contents	1 x Cartridge 150 ml 2 x Static mixer FIS MR Plus
Packaging	Cartridge
Amount	1 pcs
GTIN (EAN-Code)	4048962164008

ETA-approval
Language on label	DE
Contents	1 x Cartridge 360 ml 2 x Static mixer FIS MR Plus
Packaging	Cartridge
Amount	1 pcs
GTIN (EAN-Code)	4048962159257

Injection mortar FIS HB

Variantes

Les avantages / Description du produit

Application et autorisation

Instructions de montage

Documents à télécharger