The cost-effective hammerset anchor with a rim for quick and easy installation.

Hammerset anchor EA II

The fischer hammerset anchor EA II is an internal thread anchor made from zinc-plated and stainless steel. The fischer hammerset anchor is ideal for anchoring sprinkler systems, cable trays, and cantilevers both inside and outside. The European Technical Approval for non-cracked concrete, approval for multiple use for non-structural systems, and classification into fire resistance class R 120 offer added safety. The hammerset anchor is mounted with the hammer flush to the base material. The embossed rim prevents slipping. With the setting tool EAW H Plus or machine setting tool EA II S-SDS, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin.

Product variants

Download of image data

Product variants

Approvals / Test reports

19 Product variant (s)

Drill diameter

Min. bolt penetration

Max. bolt penetration

Packaging

Amount

GTIN (EAN-Code)

Legend = Permission Available— = Permission not Available

More results

Viewed 18 of 19 variant (s)

Advantages

The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
The fixing point at the EA II versions with 25 mm anchoring depth prevents anchor of falling out of the drill hole before being expanded during overhead installation.

Applications

Pipelines and ventilation ducts
Sprinkler systems
Cable conduits and wires
Gratings
Steel constructions
Machines
Consoles
Shuttering props

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
Concrete C20/25 to C50/60, non-cracked

Suitable for:

Concrete C12/15
Natural stone with dense structure

You can find detailed information on building materials in the registration document.

Approvals

ETA-07/0135
ETA-07/0142
DoP No. 0756-CPD-0332
DoP No. 0292
DoP No. 0291
3023222

Functionality

The EA II is suitable for pre-positioned installation.
Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
The setting tools must sit on the rim of the anchor to ensure correct expansion.
Use the special EA II M12 x 50 D / EA M 12 x 50 N D with thicker sleeve for fixing diamond and core drilling devices.

Mounting Strip 1 Picture

1 / 7

ETA Certification Document

pdf, ETA-07/0135

European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete

Created on 10/20/2021

DOP - Declaration of Performance

pdf, DoP No. 0291

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Created on 10/27/2021

ETA Certification Document

pdf, ETA-07/0142

European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems

Created on 09/24/2021

DOP - Declaration of Performance

pdf, DoP No. 0292

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Created on 09/30/2021

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0332

Declaration of Performance for fischer Drop-in anchor EA II

Valid from 06/11/2013
to 06/11/2028

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

Load Table

pdf,

Hammerset anchor EA II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in pre-stressed hollow core slabs of concrete C30/37 up to C50/60.

Hammer drill bit Quattric II S / Quattric II
74 variants

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. bolt penetration ( l_E,min )	6 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	—
Amount	100 pcs
GTIN (EAN-Code)	4048962430868

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. bolt penetration ( l_E,min )	6 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	—
Amount	100 pcs
GTIN (EAN-Code)	4048962430875

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	—
Amount	100 pcs
GTIN (EAN-Code)	4048962430882

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	—
Amount	100 pcs
GTIN (EAN-Code)	4048962430899

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962430905

Hammerset anchor EA II

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download