Art.-Nr. 48411

GTIN (EAN-Code): 4006209484111

fischer hammerset anchor EA II M8 stainless steel R

Name: fischer hammerset anchor EA II M8 stainless steel R
Brand: fischer

Variante de produs

Download of image data

Top Features

Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
Use of standard metric screws and threaded rods lowers complexity.
Power-saving series installation with machine setting tool EA II S-SDS.
ETA approval for non-cracked concrete.
Made of stainless steel for fixings used outside.

Art.-Nr. 048066
EMS M 8 x 25/30
Art.-Nr. 044631
EHS M 8 x 25/30 Plus
Art.-Nr. 549928
Quattric II 10/50/115 S
Art.-Nr. 531791
SDS Plus II 10/50/110

The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation.

Advantages

The embossed edge prevents the anchor sleeve from slipping, thus allowing trouble-free hammerset installation.
The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
The machine setting tool EMS allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the Setting tool EHS Plus offers a simple control of the anchoring and provides increased safety.
Fixing point on hef 25 mm against inadvertent of the anchor before expansion.
Ideal for applications with high load requirements.

The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval.

Applications

Sprinkler systems
Steel constructions
Machines
Consoles
Shuttering props

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Puteți găsi informații detaliate despre materialele de construcție în documentul de înregistrare

Aprobări

ETA-07/0135
ETA-07/0142
DoP No. 0756-CPD-0332
DoP No. 0292
DoP No. 0291

Functionality

The EA II is suitable for pre-positioned installation.
Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
The setting tools must sit on the rim of the anchor to ensure correct expansion.

Mounting Strip 1 Picture

1 / 7

ETA Certification Document

pdf, ETA-07/0135

European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete

Creat pe 10/20/2021

DOP - Declaration of Performance

pdf, DoP No. 0291

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Creat pe 10/27/2021

ETA Certification Document

pdf, ETA-07/0142

European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems

Creat pe 09/24/2021

DOP - Declaration of Performance

pdf, DoP No. 0292

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Creat pe 09/30/2021

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0332

Declaration of Performance for fischer Drop-in anchor EA II

Valabil de la 06/11/2013
până la 06/11/2028

Load Table

pdf,

Hammerset anchor EA II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Load Table

pdf,

Hammerset anchor EA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in pre-stressed hollow core slabs of concrete C30/37 up to C50/60.

ETA-approval
Drill diameter ( d₀ )	10 mm
Min. bolt penetration ( l_E,min )	8 mm
Max. bolt penetration ( l_E,max )	14 mm
Packaging	Folding box
Amount	100 pcs
GTIN (EAN-Code)	4006209484111

fischer hammerset anchor EA II M8 stainless steel R

Avantajele / Descrierea produsului

Aplicație și aprobare

Instrucțiuni de asamblare

Date tehnice

Documente pentru descărcare